HP 2000sa HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 32
HP StorageWorks 2000 Family Modular Smart Array CLI reference guide - storageworks 2000 sa modular smart array
View all HP 2000sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
• Ability to grow as storage demands increase. The MSA2000sa controller enclosure can support up to three cascaded drive enclosures. For detailed information about maximum-capacity configurations, see the MSA2000sa QuickSpecs. • Choice of high performance enterprise class dual-port SAS drives or low cost, high capacity archival class single-port SATA drives. Configuration, management, and monitoring tasks are performed using the Storage Management Utility (SMU) or Command Line Interface (CLI), both of which are embedded in MSA2000 family array controller firmware. For more information about these software utilities, see "Solution management tools" (page 43). Functionality of the two user interfaces is similar, but presented in different screen formats. HP recommends becoming familiar with and primarily using one of the two interfaces. For more information Device website: http://www.hp.com/go/msa2000sa (under Previous Generation) Be sure to read the following documents that are printed and shipped with the MSA2000sa: • HP StorageWorks 2000 Modular Smart Array racking instructions-Includes physical installation instructions. • HP StorageWorks 2000 Modular Smart Array Family installation road map-Includes an overview of installation and configuration steps. For detailed information about the MSA2000 storage enclosure and its utilities, see the following documents, available on HP websites: • HP StorageWorks 2000sa Modular Smart Array supported cable configurations-Includes sample illustrations of different supported configurations and their cabling. • HP StorageWorks 2012sa Modular Smart Array user guide-Includes hardware description, configuration, and user information that is unique to the MSA2012sa model. • HP StorageWorks 2000 Modular Smart Array family reference guide-Includes detailed hardware descriptions, configuration, and user information that applies to all MSA2000 models. The SMU is detailed. • HP StorageWorks 2000 Family Modular Smart Array CLI reference guide-Includes instructions for using the CLI. All commands are detailed. • HP StorageWorks 2000 Family Modular Smart Array firmware upgrade instructions-Includes information and instructions for updating firmware on MSA2000sa controllers. • HP StorageWorks 2000 Modular Smart Array troubleshooting guide-Includes troubleshooting information. Important tips • Be sure to upgrade the MSA2000sa controllers to the latest firmware version before connecting to the switch. • For high availability, two controllers must be installed in each MSA2000sa controller enclosure, and two I/O modules must be installed in each MSA2000 drive enclosure. • When cabling the MSA2000sa controller enclosure, MSA2000 drive enclosures, and HP 3Gb SAS BL Switches, be sure to follow HP recommended best practices. For more information about cabling the devices, see the user documents for the devices. Suggested references include the HP StorageWorks 2000sa Modular Smart Array supported cable configurations, HP StorageWorks 2012sa Modular Smart Array user guide, and HP StorageWorks 3Gb SAS BL Switch User Guide. For sample cabling illustrations see "Deployment examples" (page 89). • Maximum supported length of SAS cables is 4m. 32 Device information