HP 2000sa HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 84
MDS600 disk enclosure port information, the device, drawer number 1 is on the right.
View all HP 2000sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
MDS600 disk enclosure port information As shown in the following illustration: • SAS port 1:, the bottom port on each I/O module. Use this SAS port for the first connection to the host (through the SAS Switch). • SAS port 2: the top port on each I/O module. Use this SAS port in wide-port configurations for the additional connection to the host (through the SAS Switch). • Drawer numbers: Each MDS600 has two drawers that contain the drives. From the rear of the device, drawer number 1 is on the right. 1. Primary I/O module (of drawer 1) 2. Secondary I/O module (of drawer 1) 3. MDS600 enclosure drawer 1 4. MDS600 enclosure drawer 2 When cabling MDS600 enclosures to the switch, note the following: • When only one MDS600 storage enclosure is connected to a BladeSystem c-Class enclosure, a common cabling pattern is to connect one MDS600 drawer to switch ports 1-4 and the other MDS600 drawer to switch ports 5-8. This allows server bays 1-8 to access one MDS600 drawer and server bays 9-16 to access the other MDS600 drawer. 84 Device SAS port information