HP 2000sa HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 58
Installation steps, Tape Storage & Media website - g2 manual
![]() |
View all HP 2000sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
7 Installation steps This section provides an overview of the steps required to install a BladeSystem enclosure with external SAS storage; details are not included in the scope of this document. For details, see the setup and installation instructions provided with each device. User documents for devices in this solution are available on the HP Manuals website http://www.hp.com/support/manuals and on the device websites: BladeSystem Technical Resources website: http://www.hp.com/go/bladesystem/documentation (under the Installing tab) MDS600 website: http://www.hp.com/go/mds600 (under HP Support & Drivers > Manuals) MSA2000sa G2 website: http://www.hp.com/go/msa2000sa (under HP Support & Drivers > Manuals) MSA2000sa website: http://www.hp.com/go/msa (under Retired products) Tape Storage & Media website: http://www.hp.com/go/tape (under Business Class Libraries or Tape Autoloaders) NOTE: • While installing this solution, record device and system information in "Device worksheets" (page 65). This information is used in later installation or configuration steps, and will be helpful for troubleshooting and support purposes. • In this installation overview, the use of MSA2000sa refers to both the first-generation MSA2000sa and the second-generation MSA2000sa G2. Installation tasks for the MSA2000sa and MSA2000sa G2 are identical. 58 Installation steps
![](/manual_guide/products/hewlettpackard-2000sa-hp-directconnect-external-sas-storage-hp-bladesystem-solutions-deployment-guide-1b596d9/58.png)