HP 2000sa HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 94
Zoned storage—dual domain, standard cabling, In this configuration, note the following
View all HP 2000sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Zoned storage-dual domain, standard cabling This example illustrates standard cabling for a high-availability configuration when using dual-port SAS drives. In this configuration, note the following: • One cable from each MDS600 I/O module to each switch offers high availability. Devices and quantities MDS600 storage enclosures: 1 MDS600 I/O modules: 4 BladeSystem c7000 enclosures: 1 3Gb SAS BL Switches: 2 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to MDS600 drawer 2, primary I/O module, port 1 ◦ Port 5: to MDS600 drawer 1, primary I/O module, port 1 • Switch in interconnect bay 6: ◦ Port 1: to MDS600 drawer 2, secondary I/O module, port 1 ◦ Port 5: to MDS600 drawer 1, secondary I/O module, port 1 Notes • If sufficient ports on the switch are available, HP recommends connecting an additional cable from the switch to the I/O modules, for additional performance. For an example, see "Zoned storage-dual domain, wide-port cabling" (page 95) • As shown in this illustration, server bays 1-8 may access MDS600 drawer 2 and server bays 9-16 may access MDS600 drawer 1. For more information, see "HP 3Gb SAS BL Switch port information" (page 83). 94 Deployment examples