HP 2000sa HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 86
MSA2000sa controller enclosure port information
View all HP 2000sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
MSA2000sa controller enclosure port information As shown in the following illustration: • SAS host ports: two per controller. Labeled SAS Port 0 and SAS Port 1. Use these SAS host ports to connect to the hosts (switch). When two controllers are installed in the enclosure, the controllers are referred to as follows: ◦ Top controller: A, with host ports referred to as A0 and A1 ◦ Bottom controller: B, with host ports referred to as B0 and B1 • SAS expansion port: one per controller. Labeled SAS, with a diamond symbol at the bottom of the label. Use this SAS expansion port to connect (cascade) additional MSA2000 drive enclosures. 86 Device SAS port information
MSA2000sa controller enclosure port information
As shown in the following illustration:
•
SAS host ports:
two per controller. Labeled SAS Port 0 and SAS Port 1. Use these SAS host
ports to connect to the hosts (switch).
When two controllers are installed in the enclosure, the controllers are referred to as follows:
◦
Top controller: A, with host ports referred to as A0 and A1
◦
Bottom controller: B, with host ports referred to as B0 and B1
•
SAS expansion port:
one per controller. Labeled SAS, with a diamond symbol at the bottom
of the label. Use this SAS expansion port to connect (cascade) additional MSA2000 drive
enclosures.
86
Device SAS port information