HP 6125G HP 6125G & 6125G/XG Blade Switches Installation Guide-6W100 - Page 30

Appendix B Ports and LEDs Ports Console port Every HP 6125 blade switch has one console port. Table 6 Console port specifications Item Connector type Compliant standard Transmission baud rate Services Specification RJ-45 EIA/TIA-232 9600 bps (default) to 115200 bps • Provides connection to an ASCII terminal. • Provides connection to the serial port of a local PC or a remote terminal running terminal emulation program. 10/100/1000Base-T Ethernet port Every HP 6125 blade switch has 10/100/1000Base-T Ethernet ports. Table 7 10/100/1000Base-T Ethernet port specifications Item Specification Connector type RJ-45 Interface attributes • 10 Mbps, full duplex • 100 Mbps, full duplex • 1000 Mbps, full duplex • MDI/MDI-X, auto-sensing Max distance transmission 100 m (328.08 ft) Transmission medium Category-5 (or above) twisted pair cable Standards IEEE 802.3i, 802.3u, 802.3ab IRF/SFP port and SFP port An HP 6125G has up to four SFP ports. The IRF/SFP ports can be configured for IRF operation, in which case they will operate as SFP+ ports that will accept supported SFP+ modules or cables (see Table 9 and Table 10). If one or both of these ports are not used for IRF, they can be used only as SFP ports that will accept supported 1000 Mbps SFP transceiver modules (see Table 8), with the exception of HP X120 26