HP 6125G HP 6125G & 6125G/XG Blade Switches Installation Guide-6W100 - Page 33
LEDs, Unit ID LED, Health LED, 10/100/1000Base-T Ethernet port LED
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Figure 15 SFP+ cable (1) (2) (1) Connector (2) Pull latch LEDs Unit ID LED Table 11 Unit ID LED description LED mark UID Status Blue Off Description Switch ID selected. Switch ID not selected. Health LED Table 12 Health LED description LED mark Status Green Flashing yellow Off Description The blade switch has started properly. The blade switch is performing POST, or is faulty. The blade switch is not powered on, or is faulty. 10/100/1000Base-T Ethernet port LED Table 13 10/100/1000Base-T auto-sensing Ethernet port LED description Port LED status Steady green Steady yellow Off Description The port is operating at 1000 Mbps. The port LED fast flashes when the port is sending or receiving data. The port is operating at 10/100 Mbps. The port LED fast flashes when the port is sending or receiving data. No link is present on the port. 29