HP 8/8 Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864-01, June - Page 227

State and Status Information Appendix A In this appendix •Encryption engine security processor (SP) states 209 •Security processor KEK status 210 •Encrypted LUN states 210 Encryption engine security processor (SP) states Table 15 lists the encryption engine security processor (SP) states. TABLE 15 Encryption engine security processor (SP) states Encryption engine security processor (SP) state Description Not available Not Brocade Encryption Switch or DCX Not Ready Fail to connect to blade Starting SPC Connecting to SP SPC Connected to SP SP Initialized Waiting for initnode Disabled Encryption engine Faulty Waiting for initEE Waiting for regEE Waiting for enableEE Operational; Not Online Operational; Need Valid KEK Operational; Need Encryption Group Online Zeroized INVALID SLOT_XXX_SCN has not been received (debug message). Debug message. BLADE_RDY_SCN has not been received (debug message). Encryption engine is not connected to the blade processor. BLADE_RDY_SCN received and initializing. Establishing connection to CP. Connection to CP established. SP initialization completed. SP is awaiting initialization. Run initnode. SP is disabled. Encryption engine is faulty (BP fault or SP fault). Issue reboot. SP is awaiting initialization. Run initEE. SP has its own certificates but is awaiting FIPS certificates. Run regEE. Awaiting the explicit enabling of encryption engine. Run enableEE. Encryption engine is operational but offline. No current master key or primary or secondary link key. Check the KEK status for more details. Encryption engine is operational, but EG is not configured or EG information is not available. Check EG status. Encryption engine is online. Encryption engine is zeroized Encryption engine is invalid Fabric OS Encryption Administrator's Guide 209 53-1001864-01