HP 8/8 Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864-01, June - Page 94

2 Viewing and editing switch encryption properties Displaying and deleting decommissioned key IDs When disk LUNs are decommissioned, the process includes the disabling of the key record in the key vault and indicating that the key has been decommissioned. These decommissioned keys are still stored on the switch. You can display them, copy them, and delete them as an additional security measure. 1. Select Configure > Encryption from the menu bar. The Encryption Center dialog box displays. 2. Right click on the switch, and select Decommissioned keyids. The Decommissioned Key IDs dialog box displays. 3. Click Delete All to delete the decommissioned keys from the switch. As a precaution, you may want to copy the keys to a secure location before deleting them from the switch. To export the keys, right-click and select Export which will export all the key IDs. Viewing and editing switch encryption properties To view switch encryption properties, complete the following steps. 1. Select Configure > Encryption from the menu bar. The Encryption Center dialog box displays the status of all encryption-related hardware and functions at a glance. It is the single launching point for all encryption-related configuration. 2. Select the switch or encryption engine from the Encryption Devices table, and select Switch > Properties or Engine > Properties from the menu bar, or right-click the switch or encryption engine and select Properties. The Encryption Properties dialog box, shown in Figure 46, contains the following information: 76 Fabric OS Encryption Administrator's Guide 53-1001864-01