HP 8/8 Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864-01, June - Page 90

2 Encryption Targets dialog box 4. Click YES to zeroize the encryption engine. Encryption Targets dialog box The Encryption Targets dialog box enables you to send outbound data that you want to store as ciphertext to an encryption device. The encryption target acts as a virtual target when receiving data from a host, and as a virtual initiator when writing the encrypted data to storage. To access the Encryption Targets dialog box, complete the following steps. 1. Select Configure > Encryption from the menu bar. The Encryption Center dialog box displays, showing the status of all encryption-related hardware and functions. 2. Select the Group >Targets, Switch > Targets, or Engine > Targets, from the tool bar menu, or right-click on the group, switch, or encryption engine in the Encryption Devices table, and select Targets. The Encryption Targets dialog box (Figure 45) displays the targets currently being encrypted by the selected group, switch, or encryption engine. If a group is selected, all configured targets in the group are displayed. If a switch is selected, all configured targets for the switch are displayed. The Encryption Targets dialog box enables you to launch a variety of wizards and other related dialog boxes, which are defined in Table 1. 72 Fabric OS Encryption Administrator's Guide 53-1001864-01