HP AD510A HP StorageWorks 1500 Modular Smart Array maintenance and service gui - Page 55
Emu Flash Done, Firmware Flash
UPC - 829160218625
View all HP AD510A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Message 306 FIRMWARE FLASH STARTED Type Informational 307 FIRMWARE FLASH DONE Informational 308 FIRMWARE FLASH FAILED Error 309 EMU FLASH STARTED Informational 310 EMU FLASH DONE Informational 311 EMU FLASH FAILED Error 312 FIRMWARE FLASH Informational STARTED ON BOX # 313 FIRMWARE FLASH DONE ON BOX # Informational 314 FIRMWARE FLASH FAILED ON BOX # Error 400 STORAGE BOX # FAN OK Informational 401 STORAGE BOX # FAN FAILED Error Description Action The array controller in the MSA has started the firmware flash process. Do not turn off power to the system until it has completed. This could take several minutes. The array controller in the MSA has completed the firmware flash process. It is now safe to restart the MSA and begin using the new firmware. In dual-controller configurations, the new firmware is cloned onto the other controller during the startup routine. The array controller in the MSA has failed the firmware flash process. Attempt the flash process again. Should the issue persist, contact HP support. The EMU has started the firmware flash process. Do not turn off the power to the system until it has completed. This could take five minutes. The EMU has completed the firmware flash process. It is now safe to turn off power to the system. The EMU has failed the firmware flash process. Attempt the flash process again. Should the issue persist, contact HP support. A firmware flash operation has started on an attached storage enclosure. A firmware flash operation Restart the storage enclosure has completed on an to enable the new firmware. attached storage enclosure. A firmware flash operation has failed on an attached storage enclosure. Attempt the flash process again. Should the issue persist, contact HP support. A fan in the specified storage enclosure that was previously marked as failed or degraded is now operating normally. A fan in the specified storage enclosure has failed. The MSA may now be susceptible to overheating if corrective action is not taken. Check all fans and ensure they are operating. Any failed fans should be replaced. maintenance and service guide 55