HP AD510A HP StorageWorks 1500 Modular Smart Array maintenance and service gui - Page 83
Installing the controller cache module, Slide the cache module into the controller
UPC - 829160218625
View all HP AD510A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
5. After the battery pack is hooked in position, swing the pack downward, ensuring that the bottom clip and two pegs line up with the holes in the cache module. 6. Verify that the top hook (1) and bottom clip (2) on the battery pack are securely attached to the cache module. 1 2 15520 7. Repeatstep 4 through step 6 to install the second battery pack on the module. 8. Install the serviced cache module in the controller as instructed in Installing the controller cache module. NOTE: The cache is disabled while the batteries are charging and is automatically re-enabled after the batteries are fully charged. Installing the controller cache module 1. Slide the cache module into the controller (1), until the side latches are fully engaged (2). 2 1 15515 2. Close the controller cover. 3. Insert the serviced controller into the chassis as instructed in Installing the controller. maintenance and service guide 83