HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1276

Configuring Contact Information Chapter 62 Configuring Call Home Send documentation comments to [email protected] Step 2 Step 3 Step 4 Step 5 Step 6 Configure destination profiles. Associate one or more alert groups to each profile as required by your network. Customize the alert groups, if desired. Configure e-mail options. Enable or disable Call Home. Test Call Home messages. Configuring Contact Information Each switch must include e-mail, phone, and street address information. You can optionally include the contract ID, customer ID, site ID, and switch priority information. Note Switch priority is specific to each switch in the fabric. This priority is used by the operations personnel or TAC support personnel to decide which Call Home message they should respond to first. You can prioritize Call Home alerts of the same severity from each switch. To assign the contact information using Fabric Manager, follow these steps: Step 1 In the Fabric Manager Physical Attributes pane, expand Switches, expand Events, and select Call Home. You see the Call Home tabs in the Information pane (see Figure 62-1). Figure 62-1 Call Home in Fabric Manager Step 2 In Device Manager, click Admin > Events > Call Home. See Figure 62-2. 62-6 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x