HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1419

Appendix A Launching Fabric Manager in Cisco SAN-OS Releases Prior to 3.2(1) Setting the Seed Switch in Releases Prior to Cisco SAN-OS Release 3.1(1) Send documentation comments to [email protected] Note The Accelerate Discovery check box should remain checked for normal operation. Uncheck this only if you have changed switch IP addresses. You may experience problems with SAN IDs in Fabric Manager if you uncheck this check box. Step 9 Click Discover. You see the Open Fabric dialog box shown in Figure A-3. Figure A-3 Open Fabric Dialog Box Step 10 Check the check box(es) next to the fabric(s) you want to open in the Select column, or click the Discover button to add a new fabric. Note As of Cisco SAN-OS Release 3.1(1) and later, opening multiple fabrics is a licensed feature. You will get a message if any of the fabrics discovered does not have a license. Note As of Cisco SAN-OS Release 3.1(2b), a license can be a permanent license, an evaluation license, or there are no licenses (all evaluation licenses have expired). Step 11 Click Open to open the fabric. Setting the Seed Switch in Releases Prior to Cisco SAN-OS Release 3.1(1) Note As of Cisco SAN-OS Release 3.1(1), the Fabric Manager login procedure changed. If you are running Cisco SAN-OS Releases 3.1(1) to 3.2(1), then follow the login instructions in the "Setting the Seed Switch in Cisco SAN-OS Releases 3.1(1) to 3.2(1)" section on page A-1. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide A-3