HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1429

Appendix D Managing Cisco FabricWare Managing Cisco FabricWare with Fabric Manager Send documentation comments to [email protected] By default, the switch logs normal but significant system messages to a log file and sends these messages to the system console. You can specify which system messages should be saved based on the type of facility and the severity level. You can access logged system messages using the CLI or by saving them to a properly configured system message logging server. You can configure the Cisco MDS 9020 Switch using the CLI to send notifications to SNMP managers when particular events occur. You can send these notifications as traps. Managing Cisco FabricWare with Fabric Manager Fabric Manager supports switches running Cisco FabricWare. Table D-1 shows the supported features and where to find more information on that feature. Table D-1 FabricWare Features in Fabric Manager Feature FabricWare Capabilities Section Zones Zone configuration Zone membership by pWWN No Cisco FabricWare support for QoS, broadcast, LUN, or read-only zones "Configuring a Zone Using the Zone Configuration Tool" section on page 30-12 "Adding Zone Members" section on page 30-14 "About Zoning" section on page 30-1 Interfaces 1/2/4 Fibre Channel autonegotiating ports "Fibre Channel Interfaces" section on page 20-2 SNMP SNMPv1 and SNMPv2c "SNMP Version 1 and Version 2c" section on page 40-2 Software images Automated upgrades Manual upgrades "Using the Software Install Wizard" section on page 15-8 "Software Upgrade Methods" section on page 15-5 FLOGI, name server, Displaying FLOGI details FDMI, and RSCN Registering name server proxies Displaying FDMI Refer to the Cisco MDS 9020 Switch Configuration Guide and Command Reference. RSCN statistics OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide D-3