HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 992

Enabling Port Security Chapter 46 Configuring Port Security Send documentation comments to [email protected] Step 9 Click Close to exit the Insert Port Security window. Note To delete an entry in the Edit and Activate Configuration page of the wizard, select the entry and click the Delete button. Step 10 Click Finish to complete the Port Security Configuration for the selected switch. Enabling Port Security By default, the port security feature is disabled in all switches in the Cisco MDS 9000 Family. To enable port security using Fabric Manager, follow these steps: Step 1 Expand a VSAN and then select Port Security in the Logical Domains pane. You see the port security configuration for that VSAN in the Information pane (see Figure 46-5). Figure 46-5 Port Security Configuration Step 2 Click the CFS tab. You see the information show in Figure 46-6. Figure 46-6 Port Security CFS Step 3 Step 4 Enable CFS on all participating switches in the VSAN by clicking each entry in the Global column and selecting enable. Click Apply Changes to enable CFS distribution for the port security feature. 46-8 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x