HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 873

Chapter 41 Configuring RADIUS and TACACS+ AAA Server Distribution Send documentation comments to [email protected] Displaying the Session Status Once the implicit distribution session has started, you can check the session statusfrom Fabric Manager by expanding Switches > Security > AAA, and selecting RADIUS or TACACS+. You see the distribution status on the CFS tab . Displaying the Configuration to be Distributed To display the RADIUS or TACACS+ global and/or server configuration stored in the temporary buffer using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Expand Switches > Security > AAA, and then select RADIUS or select TACACS+. Click the CFS tab. You see the distribution status on the CFS tab. Click the pending or running radio button. Click Apply Changes to save the changes. Click the Servers tab to view the pending or running configuration. Committing the Distribution The RADIUS or TACACS+ global and/or server configuration stored in the temporary buffer can be applied to the running configuration across all switches in the fabric (including the originating switch). To distribute a RADIUS or TACACS+ configuration using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Expand Switches > Security > AAA, and then select either RADIUS or TACACS+. You see the RADIUS or TACACS+ configuration in the Information pane. Choose the CFS tab. You see the RADIUS or TACACS+ CFS configuration. Choose commitChanges in the Config Action drop-down list for all switches that you want to enable CFS for RADIUS or TACACS+. Click Apply Changes to distribute the changes through the fabric. . Discarding the Distribution Session Discarding the distribution of a session in progress causes the configuration in the temporary buffer to be dropped. The distribution is not applied. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 41-23