HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 589

Chapter 26 Configuring and Managing VSANs VSAN Configuration Send documentation comments to [email protected] Figure 26-5 Create VSAN Dialog Box Note As of Cisco SAN-OS Release 3.1(2) and later, if you check the Static Domain IDs check box, Fabric Manager creates the VSAN in suspended mode and then automatically activates the VSAN. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Check the switches that you want in this VSAN. Fill in the VSAN Name and VSAN ID fields. Set the LoadBalancing value and the InterOperValue. Set the Admin State to active or suspended. Check the Static Domain Ids check box to assign an unused static domain ID to the VSAN. (Optional) Select the FICON and Enable Fabric Binding for Selected Switches options if you want these features enabled. See "Configuring FICON" section on page 36-1 and Configuring Fabric Binding, page 47-1 for details. Complete the fields in this dialog box and click Create to add the VSAN or click Close. About Port VSAN Membership Port VSAN membership on the switch is assigned on a port-by-port basis. By default each port belongs to the default VSAN. You can assign VSAN membership to ports using one of two methods: • Statically-By assigning VSANs to ports. See the "Assigning Static Port VSAN Membership" section on page 26-8. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 26-7