HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 571

Chapter 25 Configuring Domain Parameters Domain IDs Send documentation comments to [email protected] Displaying Session Status To display the status of the distribution session using Fabric Manager, follow these steps: Step 1 Step 2 Expand Fabricxx > VSANxx > Domain Manager and then select Allowed in the Logical Domains pane for the fabric and VSAN for which you want to set the allowed domain ID list. View the CFS configuration and session status in the Information pane. About Contiguous Domain ID Assignments By default, the contiguous domain assignment is disabled. When a subordinate switch requests the principal switch for two or more domains and the domains are not contiguous, the following cases apply: • If the contiguous domain assignment is enabled in the principal switch, the principal switch locates contiguous domains and assigns them to the subordinate switches. If contiguous domains are not available, the NX-OS software rejects this request. • If the contiguous domain assignment is disabled in the principal switch, the principal switch assigns the available domains to the subordinate switch. Enabling Contiguous Domain ID Assignments OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 25-15