HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1426

Appendix C Interface Nonoperational Reason Codes Send documentation comments to [email protected] Table C-1 Reason Codes for Nonoperational States (continued) Reason Code Description Applicable Modes Isolation due to ELP failure Isolation due to ESC failure Port negotiation failed. Port negotiation failed. Only E ports and TE ports Isolation due to domain overlap The Fibre Channel domains (fcdomain) overlap. Isolation due to domain ID assignment failure The assigned domain ID is not valid. Isolation due to other side E The E port at the other end of the link is isolated. port isolated Isolation due to invalid fabric The port is isolated due to fabric reconfiguration. reconfiguration Isolation due to domain manager disabled The fcdomain feature is disabled. Isolation due to zone merge failure The zone merge operation failed. Isolation due to VSAN mismatch The VSANs at both ends of an ISL are different. Nonparticipating FL ports cannot participate in loop operations. It may happen if more than one FL port exists in the same loop, in which case all but one FL port in that loop automatically enters nonparticipating mode. Only FL ports and TL ports PortChannel administratively down Suspended due to incompatible speed The interfaces belonging to the PortChannel are down. The interfaces belonging to the PortChannel have incompatible speeds. Only PortChannel interfaces Suspended due to incompatible The interfaces belonging to the PortChannel have mode incompatible modes. Suspended due to incompatible An improper connection is detected. All interfaces in a remote switch WWN PortChannel must be connected to the same pair of switches. Cisco MDS 9000 Family Fabric Manager Configuration Guide C-2 OL-17256-03, Cisco MDS NX-OS Release 4.x