HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 648

IVR Zones and IVR Zone Sets Chapter 29 Configuring Inter-VSAN Routing Send documentation comments to [email protected] Figure 29-21 Edit Zone Database Dialog Box Step 2 Select a Zoneset folder and then click Activate to activate the zone set (shown in Figure 29-21) or click Deactivate to deactivate an activated zone set. You see the Save Configuration dialog box shown in Figure 29-22. Figure 29-22 Save Configuration Options for a New Zone Set Step 3 Step 4 (Optional) Check one of the Save Running to Configuration check boxes to save these changes to the startup configuration (see Figure 29-22). Click Continue Activation to activate the zone set (see Figure 29-22) or Yes if you are deactivating the zone set. Note The active zone set in Edit Zone is shown in bold if any change has been made to the full zone set resulting in a difference between the active zone set and full zone set. Activating the zone set unbolds it. Recovering an IVR Full Zone Database You can recover an IVR zone database by copying the IVR full zone database from another switch. To recover an IVR zone database using Fabric Manager, follow these steps: Step 1 Choose Zone > IVR > Edit Local Full Zone Database. You see the Edit IVR Local Full Zone Database dialog box. 29-28 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x