HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 311

Chapter 13 Using the CFS Infrastructure CFS Distribution over IP Send documentation comments to [email protected] Figure 13-6 NPV Device Selection Step 2 From the NPV Device to retrieve peer list from drop-down list box, select the device to retrieve the peer list from. If the NPV device in the list retrieved from the switch is present in the fabric, then one of the following statuses is displayed: Local, Reachable, Unreachable, or Discovery in Progress. If the NPV device is not present in the fabric, then the status is displayed as Not in Fabric. Note If the status is displayed as Not in Frabic, you must remove the device from the list. Step 3 Click Add. The following dialog box is displayed with the list of all the NPV devices in the fabric that are not included in the current peer list. By default, all the switches in the list are selected. Figure 13-7 Peer Selection OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 13-13