HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1288

Call Home Configuration Distribution Chapter 62 Configuring Call Home Send documentation comments to [email protected] Call Home Configuration Distribution You can enable fabric distribution for all Cisco MDS switches in the fabric. When you perform Call Home configurations, and distribution is enabled, that configuration is distributed to all the switches in the fabric. You automatically acquire a fabric-wide lock when you perform the first configuration operation after you enabled distribution in a switch. The Call Home application uses the effective and pending database model to store or commit the configuration changes. When you commit the configuration changes, the effective database is overwritten by the configuration changes in the pending database and all the switches in the fabric receive the same configuration. After making the configuration changes, you can choose to discard the changes by aborting the changes instead of committing them. In either case, the lock is released. See Chapter 13, "Using the CFS Infrastructure" for more information on the CFS application. Note The switch priority and the Syscontact name are not distributed. Enabling Call Home Fabric Distribution Using Fabric Manager To enable Call Home fabric distribution using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Select a switch in the Fabric pane. Expand Switches, expand Events, and select Call Home in the Physical Attributes pane. You see the Call Home information in the Information pane. Click the CFS tab. You see the CFS information for Call Home shown in Figure 62-15. Figure 62-15 Call Home CFS Tab Step 4 Step 5 Step 6 Select a switch in the Information pane. Select Enable from the drop-down list in the Admin column in the row for that switch. Click the Apply Changes icon to commit the changes. 62-18 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x