HP ENVY 14-1000 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 47
Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to
View all HP ENVY 14-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Description 250-GB, 7200-rpm Hard Drive Hardware Kit (includes hard drive bracket and screws) Solid-state drive: 256-GB 160-GB Spare part number 608369-001 608373-001 608368-001 608367-001 Before removing the mass storage device, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery cover and battery (see Battery on page 34). Remove the mass storage device: 1. Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to the computer. 2. Use the Mylar tab (1) to slide the mass storage device to the right and disconnect it from the system board. Component replacement procedures 37