HP ENVY 14-1000 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 65
Audio/USB board, that secures the audio/USB board cable to the base enclosure.
View all HP ENVY 14-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Audio/USB board Description Audio/USB board (includes cable) Spare part number 608379-001 Before removing the audio/USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery cover and battery (see Battery on page 34). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 41). 6. Remove the top cover (see Top cover on page 50). Remove the audio/USB board: 1. Disconnect the speaker cable (1) from the audio/USB board. 2. Release the grounding tape (2) that secures the audio/USB board cable to the base enclosure. 3. Release the ZIF connector to which the audio/USB board cable is attached, and then disconnect the cable (3) from the system board. 4. Remove the Phillips PM2.5×4.0 screw (4) that secures the audio/USB board to the base enclosure. 5. Remove the audio/USB board (5) and cable. Reverse this procedure to install the audio/USB board and cable. Component replacement procedures 55