HP J3111A HP JetDirect 600N Print Server Hardware Installation Guide - 5969-68 - Page 21

Step 4. Turn Off Your Printer and Insert the Card, Step 4

Page 21 highlights

Step 4. Turn Off Your Printer and Insert the Card Figure 2-2 Typical Card Installation and Network Connection Installing the 2 Print Server RJ-45 BNC 1. Turn off the printer (or mopier). 2. Identify an available HP Enhanced I/O (EIO) slot in the back of the printer. Note You can install the card into any EIO slot in the HP printer or mopier. 3. If the slot has a cover plate, remove it. 4. Insert the card. Align the card with the guide rails in the slot. 5. Press the card into the slot until firmly seated and tighten each retaining screw a little at a time until both screws are secure. 6. Connect the network cable to the card. Installing the Print Server 2-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

Installing the Print Server 2-7
Installing the
Print Server
2
Step 4
. Turn Off Your Printer and
Insert the Card
Figure 2-2
Typical Card Installation and Network Connection
1.
Turn off the printer (or mopier).
2.
Identify an available HP Enhanced I/O (EIO) slot in the back of
the printer.
Note
You can install the card into any EIO slot in the
HP printer or mopier.
3.
If the slot has a cover plate, remove it.
4.
Insert the card. Align the card with the guide rails in the slot.
5.
Press the card into the slot until firmly seated and tighten each
retaining screw a little at a time until both screws are secure.
6.
Connect the network cable to the card.
RJ-45
BNC