HP J3111A HP JetDirect 600N Print Server Hardware Installation Guide - 5969-68 - Page 22
Step 5. Verify That the Card Was Installed Correctly, Step 5
UPC - 002421211157
View all HP J3111A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Note For the HP J3111A Ethernet card, you can connect to the LocalTalk port and to only one of the Ethernet ports (RJ-45 or BNC). For the HP J3112A Token Ring card, you can connect to only one of the Token Ring ports (RJ-45 or DB 9). 7. Turn on the printer (or mopier). Step 5. Verify That the Card Was Installed Correctly 1. Print another Printer Configuration Page (or Service Configuration print) as described previously in Step 3 and verify that JetDirect Configuration Page information also prints. In HP LaserJet printers, a JetDirect Configuration Page will print for each EIO slot that contains an HP JetDirect card. 2. In the General Information section of the JetDirect Configuration Page, locate the message "I/O CARD READY". This section of the configuration page also contains productspecific information, such as: I HP JetDirect product number I Firmware revision number I LAN Hardware (MAC) address I Manufacturing identification number Note For a description of other messages that may appear on the JetDirect Configuration Page, refer to the HP JetDirect administrator's guide located on the HP JetDirect CD-ROM. 2-8 Installing the Print Server