HP J9028B User Manual - Page 9
Switch Features, end-node device is connected to the port, it con s the port as MDI-X. - procurve 1800 24g
View all HP J9028B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Switch Overview Switch Overview Switch Hardware Features Mode LEDs LED Mode Select button and indicator LEDs ■ When the FDx (full duplex) indicator LED is on, the port Mode LEDs turn on for those ports that are operating at full duplex. ■ When the Speed indicator LED is on, the port Mode LEDs turn on for ports operating at 1000 Mbps. The port Mode LEDs are off for ports operating at 10 Mbps or 100 Mbps. Switch Features The features of the ProCurve Switch 1800-24G include: ■ 24 auto-sensing 10/100/1000Base-T RJ-45 ports. ■ plug-and-play networking-all ports are enabled-just connect the network cables to active network devices and your switched network is operational. ■ IEEE 802.3ab Auto MDI /MDI-X on all twisted-pair ports, meaning that all connections can be made using straight-through twisted-pair cables. Cross-over cables are not required, although they will also work. The pin operation of each port is automatically adjusted for the attached device: if the switch detects that a 10/100 Mbps switch or hub is connected to the port, it configures the port as MDI; if the switch detects that a 10/100 Mbps end-node device is connected to the port, it configures the port as MDI-X. ■ automatic learning of the network addresses in each switch's 8000address forwarding table. ■ automatically negotiated full-duplex operation for all 10/100/1000Base-T RJ-45 ports when connected to other auto-negotiating devices ■ the mini-GBIC ports always operate at full duplex. (1800-24G) 1-3