HP Pro Mini 260 G9 Desktop PC Maintenance and Service Guide - Page 28

Fan, Before removing the fan, follow these steps

Get HP Pro Mini 260 G9 Desktop PC PDF manuals and user guides View all HP Pro Mini 260 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

4. Match the notch on the module with the tab on the memory socket (1). Slide the new module into the socket at approximately a 30° angle, and then press the module down (2) so that the latches lock it in place. NOTE: A memory module can be installed in only one way. The computer automatically recognizes the additional memory when you turn on the computer. Fan To remove the fan, use these procedures. Before removing the fan, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 16). 2. Remove the access panel (see Access panel on page 16). Remove the fan: 1. Disconnect the fan cable from the system board connector (1). 2. Lift fan up to about 90° (2). Fan 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
4.
Match the notch on the module with the tab on the memory socket
(1)
. Slide the new module into the
socket at approximately a 30° angle, and then press the module down
(2)
so that the latches lock it in
place.
NOTE:
A memory module can be installed in only one way.
The computer automatically recognizes the additional memory when you turn on the computer.
Fan
To remove the fan, use these procedures.
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
16
).
2.
Remove the access panel (see
Access panel
on page
16
).
Remove the fan:
1.
Disconnect the fan cable from the system board connector
(1)
.
2.
Lift fan up to about 90°
(2)
.
Fan
21