HP Pro Mini 260 G9 Desktop PC Maintenance and Service Guide - Page 30
Hard drive and drive cage, Rotate the hard drive latch up
View all HP Pro Mini 260 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
To install the ambient sensor, reverse the removal procedure. Hard drive and drive cage To remove the hard drive and drive cage, use these procedures. For list of available hard drives, see Computer major components on page 4. NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. Before removing the hard drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 16). 2. Remove the access panel (see Access panel on page 16). Remove the hard drive and drive cage: 1. Rotate the hard drive latch up (1) to disengage the hard drive from the connector. Slide the drive away from the connector until it stops, and then lift the hard drive up and out of the cage (2). NOTE: Computer appearance might vary. Hard drive and drive cage 23