HP Pro Mini 260 G9 Desktop PC Maintenance and Service Guide - Page 38
Processor heat sink, Remove the processor heat sink
View all HP Pro Mini 260 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
To install flex I/O connector board, reverse the removal procedure. Processor heat sink To remove the processor heat sink, use these procedures. Models with a graphics card and heat sink do not include a separate processor heat sink. IMPORTANT: The bond between the heat sink and the processor can be very tight. If the computer will turn on, before removing the heat sink, turn on the computer until it warms the heat sink. Warming the heat sink loosens the bond between the heat sink and the processor, thereby making it easier to separate them. Do not pull the processor out of the socket when you lift the heat sink, especially if you cannot warm the heat sink before removal. Inadvertently removing the processor can damage the pins. Before removing the processor heat sink, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 16). 2. Remove the access panel (see Access panel on page 16). 3. Remove the fan (see Fan on page 21). Remove the processor heat sink: 1. In the order indicated on the heat sink, loosen the three captive Torx screws (1). 2. Lift the front of the heat sink upward, and then remove the heat sink from the computer (2). IMPORTANT: Be sure to loosen the screws in the order indicated by the numbers stamped on the heat sink. IMPORTANT: For optimum thermal performance, be sure not to touch the thermal grease on the surface of the processor or the heat sink. Processor heat sink 31