HP Pro Mini 260 G9 Desktop PC Maintenance and Service Guide - Page 40
Disconnect the speaker cable from the system board, Remove the system board
View all HP Pro Mini 260 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
1. Prepare the computer for disassembly (see Preparation for disassembly on page 16). 2. Remove the access panel (see Access panel on page 16). 3. Remove the fan (see Fan on page 21). 4. Remove the memory modules (see Memory modules (SODIMMs) on page 18). 5. Remove the solid-state drive (see Solid-state drive on page 24). 6. Remove the WLAN module (see WLAN module on page 26). 7. Remove the heat sink (see Processor heat sink on page 31). 8. If installed, remove flex I/O connector board (see Flex I/O connector board on page 30). 9. If installed, remove the hard drive and drive cage (see Hard drive and drive cage on page 23). Remove the system board: 1. Disconnect the speaker cable from the system board (1). 2. Remove the Torx screw (2) that secures the system board to the computer. 3. Remove the two hex screws (3) from the serial port on the back of the computer. System board 33