HP ProBook 430 HP ProBook 430 G1 Notebook PC Maintenance and Service Guide - Page 40
Removal and replacement procedures preliminary requirements, Tools required, Service considerations
View all HP ProBook 430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4 Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdriver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from the work area to prevent damage. Plastic parts CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. 30 Chapter 4 Removal and replacement procedures preliminary requirements