HP ProBook 430 HP ProBook 430 G1 Notebook PC Maintenance and Service Guide - Page 82
and the power cable, When replacing the system board
View all HP ProBook 430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
When replacing the system board, be sure to remove the following components from the defective system board and install on the replacement system board: ● SIM card (see SIM on page 44) ● Memory module (see Memory modules on page 45) ● WLAN module (see WLAN/Bluetooth combo card on page 48) ● WWAN module (see WWAN module on page 46) Remove the system board: 1. Position the computer upright with the front toward you. 2. Disconnect the display cable (1) and the power cable (2) from the system board. 3. Remove the 2 Phillips PM2.0×4.0 screws (1) that secure the system board to the base enclosure. 72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
When replacing the system board, be sure to remove the following components from the defective
system board and install on the replacement system board:
●
SIM card (see
SIM
on page
44
)
●
Memory module (see
Memory modules
on page
45
)
●
WLAN module (see
WLAN/Bluetooth combo card
on page
48
)
●
WWAN module (see
WWAN module
on page
46
)
Remove the system board:
1.
Position the computer upright with the front toward you.
2.
Disconnect the display cable
(1)
and the power cable
(2)
from the system board.
3.
Remove the 2 Phillips PM2.0×4.0 screws
(1)
that secure the system board to the base enclosure.
72
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts