HP ProBook 430 HP ProBook 430 G1 Notebook PC Maintenance and Service Guide - Page 66
Fingerprint reader board, Remove the Phillips PM2.0×3.0 screw
View all HP ProBook 430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Fingerprint reader board NOTE: All fingerprint reader assembly spare part kits include cable, bracket, grommet, and screw) Description Fingerprint reader board (includes cable, bracket, grommet, and screw) Spare part number 727764-001 Before removing the fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the following components: a. Service door (see Service door on page 43). b. Keyboard (see Keyboard on page 37) c. Top cover (see Top cover on page 50) Remove the fingerprint reader board: 1. Position the top cover upside-down. 2. Disconnect the fingerprint reader board cable from the audio board (1). 3. Remove the Phillips PM2.0×3.0 screw (2) that secures the fingerprint reader board bracket to the top cover. 4. Pull the bracket toward bottom edge of the top cover to pull it out from slot (3), and remove it from the top cover (4). 56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts