HP ProBook 4525s HP ProBook 4525s Notebook PC - Maintenance and Service Guide - Page 82

If it is necessary to replace the display hinges, remove the Torx screws

Get HP ProBook 4525s - Notebook PC PDF manuals and user guides View all HP ProBook 4525s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

7. Lift the bezel (4) until it disengages completely. 8. If it is necessary to replace the webcam module, gently pull the webcam module away from the double-sided tape on the display enclosure (1) and disconnect the webcam cable from the module (2). The webcam module and cable can be ordered by using spare part number 598671-001. NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam module with the pins on the display enclosure and press onto the double-sided tape. 9. If it is necessary to replace the display hinges, remove the Torx screws (1) at the top and bottom of the display that secure the display to the display housing. 74 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
7.
Lift the bezel
(4)
until it disengages completely.
8.
If it is necessary to replace the webcam module, gently pull the webcam module away from the
double-sided tape on the display enclosure
(1)
and disconnect the webcam cable from the module
(2)
. The webcam module and cable can be ordered by using spare part number 598671-001.
NOTE:
To replace the webcam module in the display enclosure, align the holes on the webcam
module with the pins on the display enclosure and press onto the double-sided tape.
9.
If it is necessary to replace the display hinges, remove the Torx screws
(1)
at the top and bottom
of the display that secure the display to the display housing.
74
Chapter 4
Removal and replacement procedures