HP ProLiant 1500 SMART-2DH Array Controller Reference Guide - Page 104

6-36 Installing the Operating System Drivers SCO UnixWare 2.1 or Later The instructions in this section describe where you can find the latest driver and support information necessary to install the initial driver for a new SMART-2DH Array Controller installation or to upgrade the driver in an existing UnixWare server/SMART-2DH Controller system. If you use SmartStart to install UnixWare and drivers on a new server, or to upgrade an existing server, you can skip this section and you do not need to create the EFS diskettes. Getting the Driver and Installation Information The latest drivers and support files for SCO UnixWare and information about installing the driver are located on the Compaq SmartStart and Support Software CD supplied with the SMART-2DH Controller Option Kit. To access these files you will need to create a set of Compaq EFS for SCO UnixWare 2.1 diskettes from the Compaq SmartStart and Support Software CD. Materials Needed You will need the following items to create a set of Compaq EFS for SCO UnixWare 2.1 diskettes: s Compaq SmartStart and Support Software CD (supplied in the SMART- 2DH Controller Option Kit) s Blank diskettes s Access to a server or workstation with a bootable CD-ROM drive. This may be the system in which you are installing the SMART-2DH Controller. Creating the EFS Diskettes To create the Compaq EFS for SCO UnixWare 2.1 diskettes: Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED