HP ProLiant 1500 SMART-2DH Array Controller Reference Guide - Page 92

6-24 Installing the Operating System Drivers t Windows NT Device Driver Specifics t Compaq SCSI Controller Support t Compaq Drive Array Support t Installing the Compaq Drive Array Driver during Windows NT Installation t Installing the Compaq Drive Array Driver after Windows NT Installation t Updating the Compaq Drive Array Driver t Removing the Compaq Drive Array Driver Installation Procedures Device drivers may be installed in a Windows NT server using: s The Windows NT SSD Setup program installation method s The standard Windows NT device driver installation methods Although both are outlined in this chapter, we recommend the Windows NT SSD Setup program installation method. Windows NT SSD Setup Program Installation Method The Windows NT SSD Setup program installation method refers to device drivers that can be installed via the Setup program located on the Windows NT Support Software Diskettes. The Setup program provides a unified approach to device driver installation under Windows NT. The program identifies hardware components installed in the machine and suggests device drivers needing installation. Use the following steps to run the Windows NT SSD Setup program: 1. Start Windows NT 3.51 or NT 4.0 and log into an account with administrative privileges. 2. Insert the Windows NT Support Software Diskettes, one at a time, into the diskette drive. Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED