HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 33

Display panel, approximately 90 seconds.

Get HP Spectre Folio 13-ak1000 PDF manuals and user guides View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Display panel Description 13.3-in, UHD (3840×2160), BrightView, WLED, UWVA, 400 nits, eDP+PSR, wedge TouchScreen display panel with narrow bezel 13.3-in, FHD (1920×1080), BrightView, WLED, UWVA, 400 nits, eDP 1.4+PSR2, ultraslim TouchScreen display panel with narrow bezel 13.3-in, FHD (1920×1080), BrightView, WLED, UWVA, 300 nits, eDP+PSR, ultraslim TouchScreen display panel with narrow bezel Spare part number L38698-001 L38696-001 L38697-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. Remove the display panel: NOTE: When using the heating gun in the following steps to dissolve the adhesive that secures the display assembly, the heating gun temperature should be set to 60°C and the heating duration per edge should be approximately 90 seconds. 1. Use a heating gun to apply heat to the bottom (1), left (2) and right, and top edges (3) of the display panel to dissolve the adhesive that secures the display assembly. 2. Attach suction cups to the front left corners of the display panel and the display back cover. Component replacement procedures 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Display panel
Description
Spare part number
13.3-in, UHD (3840×2160), BrightView, WLED, UWVA, 400 nits, eDP+PSR, wedge TouchScreen display
panel with narrow bezel
L38698-001
13.3-in, FHD (1920×1080), BrightView, WLED, UWVA, 400 nits, eDP 1.4+PSR2, ultraslim TouchScreen
display panel with narrow bezel
L38696-001
13.3-in, FHD (1920×1080), BrightView, WLED, UWVA, 300 nits, eDP+PSR, ultraslim TouchScreen display
panel with narrow bezel
L38697-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
Remove the display panel:
NOTE:
When using the heating gun in the following steps to dissolve the adhesive that secures the display
assembly, the heating gun temperature should be set to 60°C and the heating duration per edge should be
approximately 90 seconds.
1.
Use a heating gun to apply heat to the bottom
(1)
, left
(2)
and right, and top edges
(3)
of the display panel
to dissolve the adhesive that secures the display assembly.
2.
Attach suction cups to the front left corners of the display panel and the display back cover.
Component replacement procedures
25