HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 44
Webcam, Reverse this procedure to install the transfer board.
View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Reverse this procedure to install the transfer board. Webcam Description FHD, infrared webcam (includes bracket) Spare part number L38705-001 Before removing the webcam, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 25). Remove the webcam: 1. Disconnect the left webcam cable (1) from the transfer board. 2. Release the left webcam cable from the retention clips (2) built into the display back cover. 3. Disconnect the right webcam cable (3) from the transfer board. 4. Release the right webcam cable from the retention clip (4) built into the display back cover. 5. Remove the three Phillips M2.5×2.3 broad head screws (5) that secure the webcam and support bracket to the display back cover. 6. Remove the webcam support bracket (6). 36 Chapter 5 Removal and replacement procedures