HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 70

and right I/O brackets, that secures the system board to the keyboard.

Get HP Spectre Folio 13-ak1000 PDF manuals and user guides View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

2. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 3. Remove the four Phillips M2.0×2.9 screws (1) that secure the system board and the left and right I/O brackets to the keyboard. 4. Remove the Phillips M2.0×2.3 broad head screw (2) that secures the system board to the keyboard. 5. Remove the left (3) and right I/O brackets (4). NOTE: The I/O brackets are available using spare part number L38684-001. 6. Lift the front edge of the system board (1) until it rests at an angle. 62 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
2.
Release the ZIF connector
(2)
to which the TouchPad cable is connected, and then disconnect the TouchPad
cable from the system board.
3.
Remove the four Phillips M2.0×2.9 screws
(1)
that secure the system board and the left and right I/O
brackets to the keyboard.
4.
Remove the Phillips M2.0×2.3 broad head screw
(2)
that secures the system board to the keyboard.
5.
Remove the left
(3)
and right I/O brackets
(4)
.
NOTE:
The I/O brackets are available using spare part number L38684-001.
6.
Lift the front edge of the system board
(1)
until it rests at an angle.
62
Chapter 5
Removal and replacement procedures