HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 49
Leather cover, Rest the computer on its back, as shown in the following illustration.
View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Leather cover IMPORTANT: Do not clean the leather cover with alcohol. It may discolor the leather. Description For use only on computer models equipped with WLAN capability For use only on computer models equipped with WWAN capability Spare part number L38672-001 L22011-001 Before removing the leather cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 25). 5. Remove the webcam (see Webcam on page 36). Remove the leather cover: 1. Swing the bottom edge of the display back cover up and forward until the rear panel is accessible. 2. Rest the computer on its back, as shown in the following illustration. 3. Use a case utility tool (1) or similar thin plastic tool to detach the lower frame cover (2) from the leather cover. (The lower frame cover is attached to the leather cover with adhesive.) NOTE: The lower frame cover is included in the Mylar/Rubber/Tape Kit, spare part number L38695-001. Component replacement procedures 41