HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 72

To install the heat sinks, Install the graphics subsystem heat sink

Get HP Spectre Folio 13-ak1000 PDF manuals and user guides View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

a. Webcam (see Webcam on page 36) b. Leather cover (see Leather cover on page 41) c. System board (see System board on page 61) Remove the heat sink: 1. Release the adhesive foil strips (1) that secure the processor heat sink to the system board. 2. Remove the four Phillips M2.0×2.9 screws (2) that secure the processor heat sink to the system board. 3. Remove the processor heat sink (3). 4. Remove the graphics subsystem heat sink (4). To install the heat sinks: 1. Install the graphics subsystem heat sink (1) onto the system board. NOTE: When installing the graphics subsystem and processor heat sinks onto the system board, make sure the metal clips (2) on the system board fully engage the heat sinks. 2. Install the processor heat sink (3) onto the system board. 64 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
a.
Webcam (see
Webcam
on page
36
)
b.
Leather cover (see
Leather cover
on page
41
)
c.
System board (see
System board
on page
61
)
Remove the heat sink:
1.
Release the adhesive foil strips
(1)
that secure the processor heat sink to the system board.
2.
Remove the four Phillips M2.0×2.9 screws
(2)
that secure the processor heat sink to the system board.
3.
Remove the processor heat sink
(3)
.
4.
Remove the graphics subsystem heat sink
(4)
.
To install the heat sinks:
1.
Install the graphics subsystem heat sink
(1)
onto the system board.
NOTE:
When installing the graphics subsystem and processor heat sinks onto the system board, make
sure the metal clips
(2)
on the system board fully engage the heat sinks.
2.
Install the processor heat sink
(3)
onto the system board.
64
Chapter 5
Removal and replacement procedures