HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 42
Transfer board, on the display panel cable, and then disconnect the display panel cable
View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Transfer board Description For use only on computer models equipped with WLAN For use only on computer models equipped with WWAN Spare part number L43332-001 L38694-001 Before removing the transfer board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 25). 5. Remove the WWAN module (see WWAN module on page 31). Remove the transfer board: 1. Release the security bar (1) on the display panel cable, and then disconnect the display panel cable from the transfer board. 2. Release the ZIF connector (2) to which the transfer board cable is connected, and then disconnect the transfer board cable from the transfer board. 34 Chapter 5 Removal and replacement procedures