HP Spectre Folio 13-ak1000 Maintenance and Service Guide - Page 60
Hinges, that conceal the hinge cover screws.
View all HP Spectre Folio 13-ak1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Reverse this procedure to install the lower frame. Hinges Description Hinges (2, includes left and right hinges) Spare part number L38690-001 Before removing the hinges, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 25), and then remove the following components: a. Webcam (see Webcam on page 36) b. Leather cover (see Leather cover on page 41) c. Speaker assembly (see Speaker assembly on page 46) d. Keyboard (see Keyboard on page 49) Remove the hinges: 1. Remove the four screw covers (1) that conceal the hinge cover screws. NOTE: The screw covers are included in the Mylar/Rubber/Tape Kit, spare part number L38695-001. 2. Remove the four Phillips M2.0×4.4 screws (2) that secure the hinge cover to the lower frame. NOTE: The hinge cover is available using spare part numbers L38689-001 (for use only on computer models equipped with WLAN) and L38688-001 (for use only on computer models equipped with WWAN). 52 Chapter 5 Removal and replacement procedures