HP StorageWorks 4/32 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 105
Verifying that the system is operating correctly, Chassis SN
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
1. Open a CLI session (Telnet or serial) to the DC SAN Director and log in as root: The root and factory account disclaimer is displayed. • Log in using Telnet. Use the IP address of the DC SAN Director through Telnet and log in as root. Fabric OS (rsl8-st03-dcx-1) login: root Password: Disclaimer for Root and Factory Accounts Usage! This Fibre Channel switch is equipped with Root and Factory accounts that are intended for diagnostics and debugging purposes solely by the Equipment vendor's trained engineers. Improper use of the functionality made available through the Root or Factory account could cause significant harm and disruption to the operation of the SAN fabric. Your use of the functionality made available through the Root or Factory account is at your sole risk and you assume all liability resulting from such use. The Equipment vendor shall have no liability for any losses or damages arising from or relating to the use of the Root or Factory account (and the functionality enabled thereby) by anyone other than the Equipment vendor's authorized engineers. Proceeding with the usage of this switch as the Root or Factory user explicitly indicates your agreement to the terms of this disclaimer. rsl8-st03-dcx-1:root> 2. Change the factory serial number to the serial number of the new chassis: a. Type fruInfoSet chassis 1 at the prompt. b. Type the OEM serial number, if any, at the SN prompt. c. Type the chassis serial number at the Chassis SN: prompt. d. Verify that the command redisplays the correct serial numbers. rsl8-st03-dcx-1:root> fruinfoset chassis 1 ID: (none) > PN: (none) > SN: (none) > OEMssn12345 RV: (none) > Chassis SN: (none) > FT00X8008A4 New FRU Info for: chassis(wwn) 1 ID: none PN: none SN: OEMssn12345 RV: none Chassis SN: FT00X8008A4 rsl8-st03-dcx-1:root> 3. Verify that the chassis serial number has been entered correctly by typing chassisShow at the prompt. Verifying that the system is operating correctly To verify that the DC SAN Director is operating correctly: HP StorageWorks DC and DC04 SAN Backbone Director Switches 105