HP StorageWorks 4/32 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 181
Replacing a core switch blade (CR4S-8)
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
7. Type firmwareDownload -s to download the firmware to one of the CP blades. Enter all requested information (use default values): swDir:admin> firmwaredownload -s Server Name or IP Address: 192.168.100.1 User Name: user File Name: /software/v6.2.0/release.plist Password: ******** Do Auto-Commit after Reboot [Y]: Reboot system after download [N]: Firmwaredownload has started. 2007/07/03-14:59:21, [SULB-1001], 923,, WARNING, DC Director, Firmwaredownload command has started. Start to install packages...... dir ldconfig glibc bash readline terminfo termcap setup tz mtracer-tool lkcd sysstat Removing unneeded files, please wait ... Finished removing unneeded files. All packages have been downloaded successfully. Firmwaredownload has completed successfully. 2007/07/03-15:05:56, [SULB-1002], 924,, INFO, DC Director, Firmwaredownload command has completed successfully. 8. Type firmwareDownloadStatus to verify that the firmware has been updated. 9. Type haEnable to re-enable HA on the active CP blade. 10. Type reboot. 11. Verify that the reboot is complete and the CP blades have achieved failover redundancy: a. Wait until the status LEDs on both CP blades are not lit. b. Type haShow and verify that the command output includes HA Enabled Heartbeat Up. If not, re-enter the command until you have verified that redundancy is achieved. 12. Type firmwareShow to verify that the firmware version has been updated. 13. Pack the faulty CP blade in the packaging provided with the new CP blade, and contact HP for the procedure for returning the faulty blade. 14. Replace the chassis door. See "Installing the chassis door" on page 170. Replacing a core switch blade (CR4S-8) This section describes how to remove and replace a core switch blade. The DC04 SAN Director has two core switch blades: one in slot 3 and one in slot 6. HP StorageWorks DC and DC04 SAN Backbone Director Switches 181