HP StorageWorks 4/32 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 146
Optional Modify passwords., HP StorageWorks Fabric OS 6.2.x administrator guide - storageworks san switch user guide
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
1. Verify that the DC04 SAN Director is powered on and that POST is complete by verifying that all power LED indicators on the port, control processor, and core switch blades display a steady green light. 2. Remove the shipping cap from the CONSOLE port on the active CP. Use the serial cable provided with the DC04 SAN Director to connect the CONSOLE port on the active CP to a computer workstation. The active CP blade is indicated by an illuminated (blue) LED. NOTE: The CONSOLE port is intended primarily for the initial setting of the IP address and for service purposes. 3. Access the DC04 SAN Director using a terminal emulator application (such as HyperTerminal in a Windows environment or TERM in a UNIX environment). 4. Disable any serial communication programs running on the workstation (such as synchronization programs). 5. Open the terminal emulator application and configure as follows: For most MS Windows systems: Bits per second-9600 Databits-8 Parity-None Stop bits-1 Flow control-None For most UNIX systems, type the following string at the prompt: tip /dev/ttyb -9600 When the terminal emulator application stops reporting information, press Enter. You will receive the following login prompt: CP0 Console Login: 6. Log in to the DC04 SAN Director as admin. The default password is password. At the initial login, the user is prompted to enter new admin and user passwords. Fabric OS (swDir) swDir login: admin Password: Please change your passwords now. Use Control-C to exit or press 'Enter' key to proceed. Password was not changed. Will prompt again at next login until password is changed. swDir:admin> 7. (Optional) Modify passwords. Passwords can be 8 to 40 characters long. They must begin with an alphabetic character. They can include numeric characters, a period (.), or an underscore (_). Passwords are case-sensitive, and they are not displayed when you enter them on the command line. Make sure to write down the new passwords and keep this information in a secure location. To skip modifying the password, press Ctrl-C. For more information on passwords, refer to the HP StorageWorks Fabric OS 6.2.x administrator guide. 146 DC04 SAN Director log in and configuration