HP Surestore 64 HP Enterprise Connectivity Fabric Manager User's Guide - Page 91

2. Type in the WWN of the node that you want to add as a zone member and click OK. 3. The WWN is added to the Members in zone area. Note This option may be desirable for nodes that have not yet been connected to a product port in the fabric. Knowledge of the port where the node attaches is not necessary. When a node is later connected to a port, zoning is already complete. 4. Add additional members by repeating steps 1-3. Removing Zone Members To clear members from the Members in zone section perform one of the following steps: • To clear a single member, select the member and drag it out of the frame. • To clear all members, choose Clear Zone from the Actions menu. When the warning appears asking if you want to remove all members in the zone, click Yes. Saving the Zone 1. When the zone is complete, click Save Zone on the New Zone dialog box. 2. If you are finished creating zones, click Cancel. The new zone is added to the Zone Library and saved to the HP EFC server. 3. Click Close to close the Zone Sets dialog box. Task 2: Define Zone Sets A zone set is a collection of zones that you can activate or deactivate as a single entity across all managed products in a multiswitch fabric or on one product in a single switch fabric. Devices in each zone are identified using the steps in Task 1: Create Zones on page 67. Configure up to 1024 zones in a zone set and up to 64 zone sets using the following steps: 1. In either the Topology View or Zoning View, choose Zone Sets from the Configure menu. Fabric Zoning Configuring and Managing Zoning 73