HP Surestore 64 HP Enterprise Connectivity Fabric Manager User's Guide - Page 93

Note To move multiple zones, press the Ctrl or Shift key while clicking the zones. Then press Ctrl+C to copy and Ctrl+V to paste to add the members to the Members in Zone section. 5. To clear a single zone from the Zones in Set section, select the zone and click Remove. 6. Continue adding zones to the set or modifying zones in the set by repeating the previous steps. 7. When the zone set is complete, click Save Zone Set on the New Zone Set dialog box. 8. If you are finished defining zone sets, click Close on the Zone Sets dialog box. Task 3: Activate the Zone Set To enable a zone set to control access between devices in a fabric, you must activate the zone set. Changing the configuration for an active zone set does not dynamically apply changes. For any change to a zone set, even modifying members in a zone that belongs to a zone set, activate the zone set using the following steps. Note It is not necessary to deactivate the active zone set before activating a new zone set. 1. In either the Zoning View or the Topology View, choose Zone Sets from the Configure menu. The Zone Sets dialog box displays. 2. Select a zone set in the Zone Set Library area of the dialog box. 3. From the Actions menu, choose Activate. The Zone Set to be activated dialog box displays. Fabric Zoning Configuring and Managing Zoning 75